<strike id="6a0go"></strike>
  • <ul id="6a0go"><sup id="6a0go"></sup></ul>
  • <strike id="6a0go"><menu id="6a0go"></menu></strike><strike id="6a0go"><input id="6a0go"></input></strike>
    
    
  • <strike id="6a0go"></strike>
    <strike id="6a0go"></strike>
    <strike id="6a0go"></strike>
    歡迎訪問詠繹電子科技(蘇州)有限公司網站,我們竭誠為您提供合格產品和專業的服務!服務熱線:0512-68051240

    產品中心/ products

    您的位置:首頁  -  產品中心  -  示波器  -  數字示波器  -  數字存儲示波器GDS-3000系列

    數字存儲示波器GDS-3000系列

    全系列 頻寬覆蓋350MHz范圍, 提供2/4輸入通道
    * 可選擇50Ω/75Ω/1MΩ三種不同的輸入阻抗
    * 可選配功率量測軟件以進行電源質量測試與分析
    * 可選配串行總線的觸發、譯碼功能.軟件可支持I2C, SPI以及UART
    * 雙取樣模式: 5GSa/s實時取樣率及100GSa/s等效取樣率
    * 強大的VPO訊號處理技術,快速洞察異常信號

    • 產品型號:
    • 廠商性質:代理商
    • 更新時間:2025-02-21
    • 訪  問  量:1211
    立即咨詢

    聯系電話:0512-68051240

    產品詳情

     
    GDS-3152
    GDS-3154
    GDS-3252
    GDS-3254
    GDS-3352
    GDS-3354
    Vertical 
    Input Channels
    2Ch+EXT
    4Ch+EXT
    2Ch+EXT
    4Ch+EXT
    2Ch+EXT
    4Ch+EXT
    Bandwidth
    DC~150MHz(-3dB)
    DC~250MHz(-3dB)
    DC~350MHz(-3dB)
    Rise Time
    2.3ns
    1.4ns
    1ns
    Vertical Resolution 8 bits
    Vertical Resolution@ 1MΩ 2mV~5V/div
    Vertical Resolution@ 50/75Ω 2mV~1V/div
    Input Coupling AC, DC, GND
    Input Impedance 1MΩ// 16pF
    DC Gain Accuracy ±(3% X |reading| + 0.1div+ 1mV)
    Polarity Normal and inverted
    Maximum Input Impedance @1MΩ 300V (DC+AC peak), CAT I
    Maximum Input Impedance @50/75Ω 5 Vrms ,CAT I
    OffsetPositionRange 2mV/div ~ 100mV/div: ±0.5V
    200mV/div ~ 5V/div: ±25V
    Bandwidth Limit
    20MHz (-3dB)
    100MHz (-3dB)
    200MHz (-3dB)
    Waveform Signal Processing Addition, Subtraction, multiplication, division, FFT, FFTrms
    Trigger 
    Source Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext
    Trigger Mode Auto (Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single
    Trigger Type Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay (1~65,535) events, Time-Delay(10nS~10S), I2C, SPI, UART
    TriggerHold-off Range 10ns~10s
    Coupling AC, DC, LF rej, HF rej, Noise rej
    Sensitivity DC~50MHz approx. 1div or 1.0mV
    50MHz~150MHz approx. 1.5div or 15mV
    150MHz~350MHz approx. 2div or 20mV
    EXT Trigger 
    Range ±15V
    Sensitivity DC~150MHz pprox.100mV
    150MHz~250MHz approx. 150mV
    250MHz~350MHz approx. 150mV
    Input Impedance 1MΩ±3%, ~16pF
    Horizontal 
    Range 1ns/div~100s/div (1-2-5steps); ROLL: 100ms/div~100s/div
    Pre-Trigger 10div maximum
    Post-Trigger 1,000div
    Accuracy ±20 ppm over any ≧1 ms time interval
    Signal Acquisition System 
    Real Time Sample Rate 2.5GSa/s 5GSa/s 2.5GSa/s 5GSa/s 5GSa/s 5GSa/s
    Equivalent Time Sample Rate 100GSa/s maximum for all models
    Record Length 25k points
    Acquisition Mode Normal, Average, Peak Detect, High resolution, Single
      Normal: Acquire sampled values
      Average: From 2 to 256 waveforms included in average
      Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds
      Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
    X-Y Mode 
    X-axis input Channel 1; Channel 3
    Y-axis input Channel 2; Channel 4
    Phase Shift ±3° at 100kHz
    Cursors and Measurement 
    Cursors Amplitude, Time, Gating available
    Automatic Measurement 28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF)
    Cursors Measurement  ?V, ?T
    Auto Counter 6digits, range from 2Hz minimum to the rated bandwidth
    Power Measurements (optional) 
    Power Quality Measurements VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle.
    Harmonics Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
    Ripple Measurements Vripple, Iripple
    In-rush Current First peak, second peak
    Control Panel Functions 
    Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
    Auto-Range Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point
    Save Setup 20 sets
    Save Waveform 24 sets
    Display System 
    TFT LCD 8" TFT LCD SVGA color display (LED backlight)
    Display Resolution 800 horizontal × 600 vertical (SVGA)
    Interpolation Sin(x)/x and equivalent time sampling
    Waveform Display Dots, Vectors, Variable persistence, infinite persistence
    Display Graticule 8 x 10 divisions
    Display Brightness Adjustable
    Interface 
    RS-232C port DB-9port
    USB port 2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port
    Ethernet RJ-45 port, 10/100Mbps
    VGAVideoPort DB-15port, SVGA monitor output
    Line Output 3.5mm stereo output jack for Go/NoGo audio alarm
    GPIB(Optional) USB to GPIB converter
    Go/NoGo BNC Maximum 5V /10mA TTL open collector ouput
    Kensington Style Lock Rear panel security slot connects to standard Kensington style lock
    Power Source 
    LineVoltageRange AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
    Miscellaneous 
    Multi-language Menu Available
    On-line Help Available
    Time clock Time and Data ,Provide the Data/Time for saved data
    Dimensions and Weight 400(W) x 200(H) x 130(D), approx. 4 kg.
     
    GDS-3152
    GDS-3154
    GDS-3252
    GDS-3254
    GDS-3352
    GDS-3354
    Vertical 
    Input Channels
    2Ch+EXT
    4Ch+EXT
    2Ch+EXT
    4Ch+EXT
    2Ch+EXT
    4Ch+EXT
    Bandwidth
    DC~150MHz(-3dB)
    DC~250MHz(-3dB)
    DC~350MHz(-3dB)
    Rise Time
    2.3ns
    1.4ns
    1ns
    Vertical Resolution 8 bits
    Vertical Resolution@ 1MΩ 2mV~5V/div
    Vertical Resolution@ 50/75Ω 2mV~1V/div
    Input Coupling AC, DC, GND
    Input Impedance 1MΩ// 16pF
    DC Gain Accuracy ±(3% X |reading| + 0.1div+ 1mV)
    Polarity Normal and inverted
    Maximum Input Impedance @1MΩ 300V (DC+AC peak), CAT I
    Maximum Input Impedance @50/75Ω 5 Vrms ,CAT I
    OffsetPositionRange 2mV/div ~ 100mV/div: ±0.5V
    200mV/div ~ 5V/div: ±25V
    Bandwidth Limit
    20MHz (-3dB)
    100MHz (-3dB)
    200MHz (-3dB)
    Waveform Signal Processing Addition, Subtraction, multiplication, division, FFT, FFTrms
    Trigger 
    Source Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext
    Trigger Mode Auto (Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single
    Trigger Type Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay (1~65,535) events, Time-Delay(10nS~10S), I2C, SPI, UART
    TriggerHold-off Range 10ns~10s
    Coupling AC, DC, LF rej, HF rej, Noise rej
    Sensitivity DC~50MHz approx. 1div or 1.0mV
    50MHz~150MHz approx. 1.5div or 15mV
    150MHz~350MHz approx. 2div or 20mV
    EXT Trigger 
    Range ±15V
    Sensitivity DC~150MHz pprox.100mV
    150MHz~250MHz approx. 150mV
    250MHz~350MHz approx. 150mV
    Input Impedance 1MΩ±3%, ~16pF
    Horizontal 
    Range 1ns/div~100s/div (1-2-5steps); ROLL: 100ms/div~100s/div
    Pre-Trigger 10div maximum
    Post-Trigger 1,000div
    Accuracy ±20 ppm over any ≧1 ms time interval
    Signal Acquisition System 
    Real Time Sample Rate 2.5GSa/s 5GSa/s 2.5GSa/s 5GSa/s 5GSa/s 5GSa/s
    Equivalent Time Sample Rate 100GSa/s maximum for all models
    Record Length 25k points
    Acquisition Mode Normal, Average, Peak Detect, High resolution, Single
      Normal: Acquire sampled values
      Average: From 2 to 256 waveforms included in average
      Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds
      Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
    X-Y Mode 
    X-axis input Channel 1; Channel 3
    Y-axis input Channel 2; Channel 4
    Phase Shift ±3° at 100kHz
    Cursors and Measurement 
    Cursors Amplitude, Time, Gating available
    Automatic Measurement 28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF)
    Cursors Measurement  ?V, ?T
    Auto Counter 6digits, range from 2Hz minimum to the rated bandwidth
    Power Measurements (optional) 
    Power Quality Measurements VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle.
    Harmonics Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
    Ripple Measurements Vripple, Iripple
    In-rush Current First peak, second peak
    Control Panel Functions 
    Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
    Auto-Range Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point
    Save Setup 20 sets
    Save Waveform 24 sets
    Display System 
    TFT LCD 8" TFT LCD SVGA color display (LED backlight)
    Display Resolution 800 horizontal × 600 vertical (SVGA)
    Interpolation Sin(x)/x and equivalent time sampling
    Waveform Display Dots, Vectors, Variable persistence, infinite persistence
    Display Graticule 8 x 10 divisions
    Display Brightness Adjustable
    Interface 
    RS-232C port DB-9port
    USB port 2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port
    Ethernet RJ-45 port, 10/100Mbps
    VGAVideoPort DB-15port, SVGA monitor output
    Line Output 3.5mm stereo output jack for Go/NoGo audio alarm
    GPIB(Optional) USB to GPIB converter
    Go/NoGo BNC Maximum 5V /10mA TTL open collector ouput
    Kensington Style Lock Rear panel security slot connects to standard Kensington style lock
    Power Source 
    LineVoltageRange AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
    Miscellaneous 
    Multi-language Menu Available
    On-line Help Available
    Time clock Time and Data ,Provide the Data/Time for saved data
    Dimensions and Weight 400(W) x 200(H) x 130(D), approx. 4 kg.
     
    GDS-3152
    GDS-3154
    GDS-3252
    GDS-3254
    GDS-3352
    GDS-3354
    Vertical 
    Input Channels
    2Ch+EXT
    4Ch+EXT
    2Ch+EXT
    4Ch+EXT
    2Ch+EXT
    4Ch+EXT
    Bandwidth
    DC~150MHz(-3dB)
    DC~250MHz(-3dB)
    DC~350MHz(-3dB)
    Rise Time
    2.3ns
    1.4ns
    1ns
    Vertical Resolution 8 bits
    Vertical Resolution@ 1MΩ 2mV~5V/div
    Vertical Resolution@ 50/75Ω 2mV~1V/div
    Input Coupling AC, DC, GND
    Input Impedance 1MΩ// 16pF
    DC Gain Accuracy ±(3% X |reading| + 0.1div+ 1mV)
    Polarity Normal and inverted
    Maximum Input Impedance @1MΩ 300V (DC+AC peak), CAT I
    Maximum Input Impedance @50/75Ω 5 Vrms ,CAT I
    OffsetPositionRange 2mV/div ~ 100mV/div: ±0.5V
    200mV/div ~ 5V/div: ±25V
    Bandwidth Limit
    20MHz (-3dB)
    100MHz (-3dB)
    200MHz (-3dB)
    Waveform Signal Processing Addition, Subtraction, multiplication, division, FFT, FFTrms
    Trigger 
    Source Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext
    Trigger Mode Auto (Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single
    Trigger Type Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay (1~65,535) events, Time-Delay(10nS~10S), I2C, SPI, UART
    TriggerHold-off Range 10ns~10s
    Coupling AC, DC, LF rej, HF rej, Noise rej
    Sensitivity DC~50MHz approx. 1div or 1.0mV
    50MHz~150MHz approx. 1.5div or 15mV
    150MHz~350MHz approx. 2div or 20mV
    EXT Trigger 
    Range ±15V
    Sensitivity DC~150MHz pprox.100mV
    150MHz~250MHz approx. 150mV
    250MHz~350MHz approx. 150mV
    Input Impedance 1MΩ±3%, ~16pF
    Horizontal 
    Range 1ns/div~100s/div (1-2-5steps); ROLL: 100ms/div~100s/div
    Pre-Trigger 10div maximum
    Post-Trigger 1,000div
    Accuracy ±20 ppm over any ≧1 ms time interval
    Signal Acquisition System 
    Real Time Sample Rate 2.5GSa/s 5GSa/s 2.5GSa/s 5GSa/s 5GSa/s 5GSa/s
    Equivalent Time Sample Rate 100GSa/s maximum for all models
    Record Length 25k points
    Acquisition Mode Normal, Average, Peak Detect, High resolution, Single
      Normal: Acquire sampled values
      Average: From 2 to 256 waveforms included in average
      Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds
      Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
    X-Y Mode 
    X-axis input Channel 1; Channel 3
    Y-axis input Channel 2; Channel 4
    Phase Shift ±3° at 100kHz
    Cursors and Measurement 
    Cursors Amplitude, Time, Gating available
    Automatic Measurement 28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF)
    Cursors Measurement  ?V, ?T
    Auto Counter 6digits, range from 2Hz minimum to the rated bandwidth
    Power Measurements (optional) 
    Power Quality Measurements VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle.
    Harmonics Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
    Ripple Measurements Vripple, Iripple
    In-rush Current First peak, second peak
    Control Panel Functions 
    Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
    Auto-Range Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point
    Save Setup 20 sets
    Save Waveform 24 sets
    Display System 
    TFT LCD 8" TFT LCD SVGA color display (LED backlight)
    Display Resolution 800 horizontal × 600 vertical (SVGA)
    Interpolation Sin(x)/x and equivalent time sampling
    Waveform Display Dots, Vectors, Variable persistence, infinite persistence
    Display Graticule 8 x 10 divisions
    Display Brightness Adjustable
    Interface 
    RS-232C port DB-9port
    USB port 2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port
    Ethernet RJ-45 port, 10/100Mbps
    VGAVideoPort DB-15port, SVGA monitor output
    Line Output 3.5mm stereo output jack for Go/NoGo audio alarm
    GPIB(Optional) USB to GPIB converter
    Go/NoGo BNC Maximum 5V /10mA TTL open collector ouput
    Kensington Style Lock Rear panel security slot connects to standard Kensington style lock
    Power Source 
    LineVoltageRange AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
    Miscellaneous 
    Multi-language Menu Available
    On-line Help Available
    Time clock Time and Data ,Provide the Data/Time for saved data
    Dimensions and Weight 400(W) x 200(H) x 130(D), approx. 4 kg.

    在線咨詢

    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯系電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7

    掃碼添加微信

    • 蘇州高新區長江路436號綠寶商務樓2幢7003室
    • 聯系電話:0512-68051240
    • 公司郵箱:chunjing_liu@yoi-tech.com

    © 2025 詠繹電子科技(蘇州)有限公司(m.7474ll.com) 版權所有    

    技術支持:化工儀器網    管理登陸    sitemap.xml

    TEL:

    掃碼聯系我們

    主站蜘蛛池模板: 亚洲欧洲精品成人久久曰影片 | 国产这里有精品| 中文精品人人永久免费| 国产精品免费在线播放| 国产亚洲精品观看91在线| 日产精品99久久久久久| 久久夜色撩人精品国产小说| 国产高清在线精品一区二区三区| 成人精品在线视频| 久久精品无码一区二区无码| 午夜福利麻豆国产精品 | 四虎国产精品免费久久久| 国产AV国片精品有毛| 无码aⅴ精品一区二区三区浪潮 | 日韩精品毛片| 国产香蕉国产精品偷在线 | 中文成人无字幕乱码精品区| 久久91精品综合国产首页| 好湿好大硬得深一点动态图91精品福利一区二区 | 亚洲中文字幕久久精品无码喷水| 中文精品99久久国产 | 国产精品午夜久久| 伊人久久精品线影院| 久久91精品国产91久久户| 国产成人精品无码播放| 久久66热人妻偷产精品9| 日韩精品无码免费一区二区三区 | 亚洲av无码成人精品区| 亚洲国产精品人人做人人爽| 亚洲综合精品网站在线观看| 亚洲精品久久久www| 在线观看国产精品日韩av| 永久免费精品影视网站| 亚洲精品综合久久| 亚洲а∨天堂久久精品9966| 午夜国产精品无套| 亚洲国产精品无码一线岛国| 久久影院综合精品| 国产午夜精品久久久久免费视| 国精品无码一区二区三区在线 | 精品国产免费人成网站|